Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
Custom High Density Kevlar Cord (components)
aroundsquare

Custom High Density Kevlar Cord (components)

Regular price $5.00 $70.00
Shipping calculated at checkout.

High Density Kevlar Cord

In order to provide alternatives to standard paracord varieties, Aroundsquare has undertaken custom manufacturing of a variety of new cords, purpose built for our products. Our Kevlar cords are all woven at high density for superior feel and durability. 

1.2mm/ 1g Cord

In the past, our 6mm beaded MKUltras and our Remeshok chetki have always been strung on our custom-made 1mm Kevlar cord. On a whim, we decided to try making some sample cord at 1.2mm, and we've found some big love for this slightly thicker cord. Although the 1mm cord is plenty strong, the K1.2 has a more robust feel to it, and a bit of added durability to boot. This cord is available in black, natty/ yellow, red, and blue. 

  • 1g/m spec weight
  • ~1.2mm diameter 
  • Available in 2m, 5m, and 10m hanks 

Optimized for use with the following products: 

  • Any Remeshock Chetki and 6mm MKUltra beads

4mm/ 12-strand/ 7.3g Cord

Our 4mm/ 7g Kevlar cord was developed as an alternative to the 550 paracord used on most of our begleri models. The cord is a 12-strand weave, which is round (actually hexagonal) in shape, and slightly wider than most 550 paracord, but also softer and more compactable, making it fairly easy to use with most begleri sets. Although the weave is coarser looking than 550 paracord, the feel is somewhat softer, and it tends to move nicely through the fingers without binding. The construction also helps it to retain its shape and makes it less prone to flattening than standard paracord. Note that Kevlar does not melt easily, and a lighter will not melt or flatten the cord, which means that the cord needs to be knotted and tasseled. When cutting the cord, it is recommended that a small piece of clear tape be used to compress the cord and keep it from fraying, which will make it vastly easier to insert into the bore or your begleri. This cord is available in natty/ yellow and black. 

Specifications: 

  • 12-strand round/ hexagonal woven kevlar cord
  • 7.3g/m spec weight
  • ~4mm diameter (comparable to 550 paracord
  • Available in 2m, 5m, and 10m hanks 

Optimized for use with the following products: 

  • Any begleri with a 3.5mm or 4mm bore

2mm/ 12-strand/ 3.4g Cord

Aroundsquare's new 2mm high density kevlar cord is a full custom product, manufactured to our individual specifications, and unlike anything else you'll find on the market. The cord is a round-woven 12-strand construction, with a smooth feel and clean appearance. The cord is woven at high density, giving it less compressibility and more strength than average cord, with a spec weight of around 3.4g/m. This distinguishes it from most other commercially available kevlar, and the difference is clear. It is smoother and finer in both appearance and feel, it is extraordinarily strong, and is extremely durable. Importantly, as it ages, it doesn't swell in the same manner as coarser cords, and as it wears, it gets softer without a significant impact on performance.

The cord designed as an alternative to 275 paracord, or the 2mm accessory cord from Sterling Ropes that we use on many of our products, and was developed with our MKUltras front of mind. For the two strand compression into the lock bead, it's darn near perfect. It fits the standard 3.5mm bore of our Micro Boss and Lil' Boss beads exactly as intended. It is a breeze to install (with just a tiny bit of tape), and it holds the boss bead snug enough to keep it in place well, while still being easy to adjust. 

Kevlar cord, especially at high density, is relatively stiff when it's new, but it softens up considerably with use. In the first few days, the surface will show some lightening and aging, but it stabilizes quickly with minimal further changes. As our Kevlar cord ages, it takes on a look and feel of soft cotton, but while cotton tends to fray and degrade pretty quickly, this is not the case with Kevlar. The feel is actually quite velvety and soft. It remains soft to the touch, and supple to manipulate. As the cord ages, it retains the same properties, and based on our tests thus far (we're a couple months in on this cord), it should have very good longevity. 

Specifications: 

  • colour: black, red, yellow, blue
  • 12-strand round woven kevlar cord
  • 3.4g/m spec weight
  • ~2mm diameter (comparable to 275 paracord
  • Available in 5m and 10m hanks 

Optimized for use with the following products: 

  • All metal MKUltras (not recommended for wooden or jade bodhi Ultras)
  • Any begleri with a 3mm or 3.5mm bore (not recommended for 4mm bore) 
  • Mini Monkey Knuckles - Delrin Edition

1.7mm/ 2.1g Cord

The 1.7mm cord is designed for the Pozvonok chetki. It's comparable to 95 paracord in thickness, but a little stiffer initially like all kevlar.

Specifications: 

  • 2.1g/m spec weight
  • ~1.7mm diameter (comparable to 95 paracord)
  • Available in 2m, 5m, and 10m hanks 

Optimized for use with the following products: 

  • Pozvonok chetki

1mm/ 0.9g Cord

The 1mm Kevlar is purpose built for the Remeshok chetki. It's slightly thicker and a bit more robust than the stock cord that was used to string up the Remeshoks when they first launched. Remeshoks as of March 2022 have all shipped on this cord. 

Specifications: 

  • 0.9g/m spec weight
  • ~1mm diameter
  • Available in 2m, 5m, and 10m hanks 

Optimized for use with the following products: 

  • Any Remeshock Chetki and 6mm MKUltra beads

Customer Reviews

Based on 7 reviews Write a review

More from this collection

Customer Reviews

Based on 7 reviews
100%
(7)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
N
Nickolaus V
4mm kevlar 2m cord

I was giving this a try because I saw that it was hexagonal which was interesting for the weave - after using it as my joiner for my sigmas I don't know if I can go back to silk! It is definitely a chunkier cord than both silk/paracord but I think its fantastic! I also like how its worn and is about a TAD rougher than silk but not as rough as the soft paracord and is more durable and becomes like boxy ish but you can then press on it and make it hexagonal again instead of the like 2mm cord that just can get flatter so if you're looking for soft longevity this is the one imo!
pic on table is new/pic in hand used for a few weeks if I remember right

J
Jacob
Great Cord

I have all of the Kevlar cord besides the 1.7mm. It ages beautifully. I currently have the 4mm on my Ti Sigmas, and it has become nice and supple without losing its integrity. The 1.2mm is a nice upgrade from the 1.0mm. The 2mm is great on my MkUltras.

A
Aldrin Cornejo
My go to cord

Great color, and a tough cord. I've restrung all of my MK Ultras and a few Begleri with the red Kevlar 2mm and love them.

M
Matthias Joos

All the kevlar cords are awesome but the 2mm one is just perfect.

J
J.S.

great cord, super durable and lovely color, works great on my MKultras